Bearing Flicker

A holder that fits a bearing snugly at the tip to help with maintenance. Compatible with all sizes A, B, C, and D bearings.

Download the STL file

Get the TinkerCAD file

Tips on printing

  • Print upright with the bearing seat on top. Add a brim for bed adhesion if necessary.
  • Adjust scale in x and y for a perfect fit against the bearings. TinkerCAD file is available above to adjust the two bearing posts individually.
  • Use enough walls to ensure the bearing seat has sufficient adhesion with the body.
  • Not recommended as a bearing remover. Plastic won't win against a stuck bearing.